Assembling Point

z Confirm that the cables are connected correctly. (Refer to Figures 3-12 and 5-3..) z Tighten the screws while pulling the printhead as shown below to secure the printhead firmly.

Step 12: Install the cable cover and the FPC cover.

Step 13: Wipe off any stains from the carriage guide shaft, lubricate both ends of the carriage guide shaft with the included oil (0-2), and spread the oil over the shaft by moving the carriage manually.

Figure 3-15. Lubricating to Carriage Guide Shafts

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment