Printable area

Refer to Figure 1-3.

ABCD

ABCD

WXYZ

WXYZ

Continuous Paper

PW (width)

Refer to Section 1.2.12.

PL (length)

Refer to Section 1.2.12.

LM (left margin)

13 mm to 31mm

RM (right margin)

13 mm or more

TM (top margin)

2.6 mm or more

BM (bottom margin)

4.2 mm or more

Notes 1: In the top 75 mm area, the paper feeding pitch may be irregular. Notes 2: If the optional pull tractor is used, the top 120 mm area should not be printed. Notes 3: Forms-override printing is available 20 lines after the paper end. (Paper feeding pitch is not guaranteed.)

The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper. Figure 1-3. Continuous Paper Printable Area

Labels :

Refer to Figure 1-4.

Continuous Paper

PW (width)

Refer to Section 1.2.12.

PL (length)

Refer to Section 1.2.12.

LM (left margin)

13 mm to 31mm

RM (right margin)

13 mm or more

TM (top margin)

2.6 mm or more

BM (bottom margin)

4.2 mm or more

Notes 1: Feeding backward or paper (PATH) selection are prohibited. Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular. Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed.. Notes 4: Forms-override printing is available 20 lines after the paper end. (Paper feeding pitch is not guaranteed.)

The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper. Figure 1-4. Label Printable Area

Continuous forms with labels

Refer to Figure 1-5.

Label x: tfl

Non Printable Area o o o o o o o o

Non Printable Area

3! TOL

Printable Area

LOL Label ROL

Continuous Paper

PW (width)

Refer to Section 1.2.12.

PL (length)

Refer to Section 1.2.12.

LM (left margin)

13 mm to 31mm

RM (right margin)

13 mm or more

TM (top margin)

2.6 mm or more

BM (bottom margin)

4.2 mm or more

LFL (left margin from label)

65 mm or more

RFL (right margin from label)

65 mm or more

TFL (top margin from label)

12.5 mm or more

BFL (bottom margin from label)

12.5 mm or more

LOL (left margin on label)

5 mm or more

ROL (right margin on label)

5 mm or more

TOL (top margin on label)

2 mm or more

BOL (bottom margin on label)

2 mm or more

Notes 1: Feeding backward or paper (PATH) selection are prohibited. Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular. Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed.. Notes 4: Forms-override printing is available 20 lines after the paper end. (Paper feeding pitch is not guaranteed.)

The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper.

Figure 1-5. Continuous Forms with Labels Printable Area 110 Rev. B

□ Overlapping multi-part forms : Refer to Figure 1-6.

LM RM

Carrier

V

PW _^

h

S

o

joooooooo

A

A

O i

o

o

o

, A

o

o

t1

TM

Continuous Paper

PW (width)

Refer to Section 1.2.12.

PL (length)

Refer to Section 1.2.12.

LM (left margin)

19 mm to 31mm

RM (right margin)

19 mm or more

TM (top margin)

21.2 mm or more

BM (bottom margin)

4.2 mm or more

OL (overlapping length)

Less than 13.3 mm

NA (non printable area)

25.4 mm or more

Notes 1: Feeding backward or paper (PATH) selection are prohibited. Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular. Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed.. Notes 4: Forms-override printing is available 20 lines after the paper end. (Paper feeding pitch is not guaranteed.)

The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper. Figure 1-6. Overlapping Multi-part Form Printable Area

DFX-8500

Was this article helpful?

0 0
Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment