Epson Artisan 700 Disassembly

4. Close the Scanner Unit.

5. Tighten the screw (x1) finally after making sure that there is no gap between the Scanner Unit and the printer.

Figure 4-11. Installing the Scanner Unit

Make sure to insert the terminal of the Grounding wire to the fixing rib of the Frame. (See Fig. 4-6.) For the routing of the FFCs, see 4.4 "Routing FFC/cables" (p202).

When installing the Cable Cover, secure it with a new Harness Cover Clamp. (See Fig. 4-3.)

□ Parts/Components need to be removed in advance:

ADF Unit (Artisan 800/PX800FW/TX800FW only)/Scanner Unit

□ Removal procedure

1. Remove the screw (x1) that secures the Hinge and remove the Hinge.

Tx800fw Disassemble

■ O C.B.P. 3x10 (6±1Kgfcm)(Artisan 800/PX800FW/TX800FW) W C.B.P. 3x12 (black) (6±1Kgfcm)(Artisan 700/PX700W/TX700W)

Figure 4-12. Removing the Hinge

■ O C.B.P. 3x10 (6±1Kgfcm)(Artisan 800/PX800FW/TX800FW) W C.B.P. 3x12 (black) (6±1Kgfcm)(Artisan 700/PX700W/TX700W)

Figure 4-12. Removing the Hinge

After removing/replacing the Scanner Unit, make the specified adjustments. (See Chapter 5 "ADJUSTMENT".)

Disassembly Procedures

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Responses

  • Marmaduke Mugwort
    How disamble epson artisan?
    8 years ago

Post a comment