Housing Upper

1) Remove the two screws on backside of the Housing, Upper.

2) Insert a flathead screwdriver into the two tabs on upper backside of the Housing, and release the tabs.

3) Open the Stacker Assy. (See 4.3.1.2 Removing Stacker Assy. Step 2).

4) Having your hands on the grooves of the Housing, Lower, press the parts toward the direction of the arrows a shown in Figure 4-3, and remove the Housing, Upper.

Tabs

Tabs

Figure 4-3. Removing Housing, Upper

Was this article helpful?

0 0

Post a comment