Epson Stylus Cx4700 Scanner Repair

Epson Stylus Cx4700 Scanner Repair

Drive of the Scanner Motor is transferred to the Scanner Carriage Unit by the Scanner Timing Belt. The Scanner Carriage Unit slides in the secondary scanning direction. The Scanner Motor uses a stepping motor and drives using open loop control. When the HP detection flag of the Scanner Carriage Unit disrupts the signal of the Scanner HP Sensor, the Scanner HP Sensor outputs a high signal, and the Scanner Carriage Unit is determined to be in the home position. Figure 2-16. Scanner Carriage Unit...

Removal procedure

Perform the removal procedure Step 1 of Waste Ink Pads Stacker Lock PG Lever Rubber Feet p138 . 2. Follow the instructions below to remove the Waste Ink Tube. 1. Release the Waste Ink Tube from the groove of the Housing, Lower. 2. Pull out the Waste Ink Tube from the Waste Ink Cover. 3. Remove the Waste Ink Tube together with the Tube Clump and the Eject Ink Joint. 3. Remove the Waste Ink Cover and 11 pieces of the Waste Ink Pads from the Housing, Lower. When installing 11 pieces of the...

Printer Mechanism

Roller Epson

This printer consists of the Print Head, Carriage Mechanism, Paper Loading Mechanism, Paper Feeding Mechanism, Ink System. Like the previous printers, Stylus CX4100 CX4200 CX4700 CX4800 DX4200 DX4800 DX4850 is equipped with two DC motors one for the Paper Loading Feeding Mechanism and the Pump Mechanism with the CR Lock Mechanism, and one for the CR Mechanism. The ASF Unit for the Paper Loading Mechanism uses rear entry front eject system. The Paper Feeding Mechanism uses the LD Roller and...