Disassembly Procedures

This section explains the procedures for disassembling the product.

Unless otherwise stated, reassembly should be carried out in the reverse order of the disassembly procedure. For detailed engagement relations among main components, refer to the exploded diagrams in the Appendix.

Figure 4-2. Disassembling Flowchart

4.3 Printer Section 4.3.1 Paper Support Assy.

□ Part/Unit that should be removed before removing Paper Support Assy.

None

□ Removal Procedure

1. Release the Paper Support Assy. from the guide pins (x2) of the Lower Case, and remove the Paper Support Assy. from the Lower Case.

Paper Support Assy.

Paper Support Assy.

Figure 4-3. Removing Paper Support Assy.

4.3.2 Stacker Assy.

□ Part/Unit that should be removed before removing Stacker Assy.

None

□ Removal Procedure

1. Open the Stacker Assy.

2. Press in the white pin on the left with a precision screwdriver or a similar tool to release the left side of the Stacker Assy. Then remove the Stacker Assy. pulling out its pin on the right from the Lower Case.

Figure 4-4. Removing Stacker Assy.

Was this article helpful?

+2 -1

Responses

  • HARRY
    How to disassemble cx5500?
    8 years ago

Post a comment