Document CoverASF Cover Support

CAUTION

When disassembling/assembling the Scanner Unit after removing the Document Cover, make sure to protect the document glass from damage and dirt. Also, pay extra care to keep the Document Cover mat surface clean.

3. Open the Scanner Unit.

4. Press the upper left and right sides of the Support Arm inward to release its upper left and right guide pins from the Scanner Unit.

5. Remove the Support Arm releasing its lower left and right guide pins from the guide rails on the Middle Case.

□ Part/Unit that should be removed before removing Document Cover /ASF Cover /Support Arm

None

□ Removal Procedure

1. Remove the Document Cover pulling out its left and right guide pins from the holes on the Scanner Unit.

Figure 4-5. Removing Document Cover

2. Remove the ASF Cover pulling out its left and right holes from the guide pins on the Scanner Unit.

Figure 4-6. Removing ASF Cover
Figure 4-7. Removing Support Arm
Figure 4-8. Installing Support Arm

Was this article helpful?

0 0

Post a comment