Caution Do not damage the rubber rollers when removing the Roller EJ Assy

Paper Guide, Front Roller EJ Assy. Removal 2 When installing the Paper Guide, Front to the Frame, Main Be careful not to damage the surface of the Roller PF Assy. Be careful not to damage the rib of the Paper Guide, Front or the Porous Pad, Paper Guide, Front. Check if the dowels and the tab of the Paper Guide, Front are correctly secured to the Frame, Main. Figure 2-47. Paper Guide, Front Installation Figure 2-47. Paper Guide, Front Installation Make sure that there is no gap...

Disassembly Procedure

Epson Stylus Photo R230 Parts

Remove the three screws that secure the Paper Guide, CDR. 2. Remove the five screws that secure the Printer Mechanism to the Housing, Lower. 3. Release the four tabs that secure the Printer Mechanism to the Housing, Lower and remove the Printer Mechanism upward. Figure 2-32. Printer Mechanism Housing, Lower Removal Be careful not to leak and drip ink from the end of the Ink Tube Waste Ink Pads side when lifting the Printer Mechanism. Be sure to hold the specified positions to lift the...

Caution When removing the Frame EJ Assy be careful not to damage or transform the Star Wheels of the Frame EJ Assy

Frame Front Guide

Remove the Flat Washer which secures the Link EJ, Left, and then slide the Link EJ, Left slightly to the right side. 7. Remove the Extension Spring, Push Up, Plate, Left from the both tabs of the Guide, Shaft, Frame EJ, Left and the Frame, Main. 8. Release the tabs which secure the Guide, Shaft, Frame EJ left right and remove the Guide, Shaft, Frame EJ left right . Figure 2-44. Paper Guide, Front Roller EJ Assy. Removal 1 9. Release the tab which secures the Paper Guide, Front to the Frame,...

Figure Carriage Unit Removal

Carriage Unit Epson 230

Carriage Unit Removal 2 Figure 2-26. Carriage Unit Removal 2 8. Remove the E Ring, the Holder, Scale Right and the Cam, CR Right from the right side of the CR Guide Shaft. 9. Remove the Fixed Spring, CR Shaft, Right from the tab of the Frame, Main. Then, remove the Fixed Spring, CR Shaft, Right from the CR Guide Shaft. 10. Remove the E ring and the Flat Washer that secure the Holder, Scale Left. 11. Remove the E Ring, the Flat Washer and the Spring Washer from the left side of the...

Housing Frame Removal

Epson Stylus Photo R230 Parts

Remove the screw 2 that secures the Housing, Frame to the Printer Mechanism. 2. Remove the screw 2 that secures Cover, Ink Tube to the Housing, Frame and then Release the tab 3 to remove the Cover, Ink Tube. 3. Release the three tabs g that secure the backside of the Housing, Frame with a flat-blade screwdriver or similar tool. 4. Release the left and right tabs 5 that secure the front side of the Housing, Frame. 5. Lift the Housing, Frame to disconnect the connector cable of the Panel Board...

Ink System Unit Removal

Cap Assy Epson

I Combination Gear, 27.2, 19.2 Tabs Figure 2-41. Ink System Unit Removal I Combination Gear, 27.2, 19.2 Tabs Parts Units which should be removed before removing the Ink System Unit Paper Support Assy. Housing left right Housing, Frame ASF Assy. Holder, Shaft Assy. Main Board Assy. APG Assy. Print Head Carriage Unit Printer Mechanism CDR Guide Assy. 1. Remove the two screws that secure the Support Plate, Frame, Main and remove it. 2. Remove the screws that secures the Cap Assy. to the Frame,...

Disassembly

Epson R220 Roller

Removal 2 Figure 2-17. Holder, Shaft Assy. Removal 2 1. Release the two dowels that secure the Paper, Block to the Holder, Shaft Assy., and remove it. 2. Remove the Shaft, LD Roller and the Clutch from the Holder, Shaft, LD Roller. When reinstalling the LD Roller to the Shaft, LD Roller, Do not touch the LD Roller with bare hands. Make sure to match the direction AMark indicated on the Shaft, LD Roller and the direction A Mark indicated on the back side of the...

Print Head Removal

Epson Head Removal

Print Head Removal Parts Units which should be removed before removing Print Head. Paper Support Assy . Housing left right Housing, Frame Figure 2-12. Print Head Removal Parts Units which should be removed before removing Print Head. Paper Support Assy . Housing left right Housing, Frame Remove the Ink Cartridges from the Carriage Unit. Remove the screw which secures the Holder, FFC to the Carriage Unit with a No.l screwdriver. Then slightly lift the Holder, FFC to release three...

Porous Pad Paper Guide Front Removal

Epson Porous Pad

Porous Pad, Paper Guide, Front, Left Porous Pad, Paper Guide, Front Porous Pad, Paper Guide, Front, Left Porous Pad, Paper Guide, Front Porous Pad, Paper Guide, Front, Support Porous Pad, Paper Guide, Front, Support Figure 2-13. Porous Pad, Paper Guide, Front Removal Figure 2-13. Porous Pad, Paper Guide, Front Removal Parts Units which should be removed before removing the Porous Pad, Paper Guide, Front. Removing the following three types of the Porous Pads from the Paper Guide, Front with the...

Main Board Assy Removal

Sensor Epson R230

Removal Figure 2-15. Main Board Assy. Removal Parts Units which should be removed before removing Main Board Assy. Paper Support Assy. Housing left right Housing, Frame ASF Assy. Disassembly Procedure Remove the screw that secures the Earth and release the Earth. Disconnect the all connector cables from the Main Board and remove the Acetate Tapes from the Main Board. Power Supply cable PF Motor cable APG Motor cable Interface Board cable Print Head FFC Print Head...