What Is An Epson Pf Motor

2. Disconnect the one connector cable of the PF Motor ASSY and take it out through the hole in the L Side Frame.

(See Figure 4-50)

3. Remove the four screws securing the PF Motor Mounting Plate. (See Figure 4-51)

4. Move the PF Motor toward the printer body and remove the PF Motor by lifting the gear side.

After replacing the P_EDGE Sensor, the following adjustment operation should be performed.

'PFMotor Adjustment (p.214)"

Motor Stylus Pro 9600

Clamp

Figure 4-50. Removing the PF Motor ASSY Harness Connector.

Clamp jmaz .mm

Figure 4-50. Removing the PF Motor ASSY Harness Connector.

Epson Motor
Figure 4-51. Removing the PF Motor.
+3 -1

Post a comment